Add Outputs

Knowledge Base - Guarded Area setup in iProtect™
13/05/2020
Print

  • Click in iProtect™ Aurora on the menu item Installation | Hardware | Output.
  • Right-click in the browse window and select ‘Add output’. The detail window opens.
  • Enter these data:

Name: Enter a logic name for the output
Node: Select a Node which is on the same Line as the Guarded area.
Output mode: Follow source
Source: Follow guarded area status Status: Disarmed, Armed, Arming, Partly armed, Too long disarmed or Walk in) or
Source: Follow guarded area mode (Set; Unset) or
Source: Follow Guarded area alarm buzzer

  • Save the data.